z/VM: System Messages and Codes Š CP - z/VM - IBM

FRF002
Explanation: A request for free storage could not be
satisfied due to either a lack of reserved frames, or
because the system could not replenish the reserved
frames list fast enough.
User Response: Examine the trace tables for a
possible loop condition that involves obtaining free
storage or any condition involving an excessive number
of free storage requests. R14 points to the address in
HCPFRF where CP detected the abend. This abend
might have been caused by one of the following:
v Repeated CP commands consumed free storage.
v Queued console output, accounting or EREP records,
or both that were not being retrieved.
Ensure the free storage limit detection function is on for
the system (SET/QUERY STGLIMIT).
FRX001
Explanation: Insufficient memory was available during
system initialization to allocate the primary memory pool
for SCSI device support.
User Response: Contact your IBM support personnel.
FRX002
Explanation: Insufficient memory was available during
system initialization to allocate the secondary memory
pool for SCSI device support.
User Response: Contact your IBM support personnel.
FRX016
Explanation: The SCSI memory pool has been
compromised. Register 15 contains one of the following
reason codes:
8 The address to be released has already been
released.
16 The address to be released is not on a 16-byte
boundary.
20 The header is not within the memory pool.
(When the length of the free storage header
was subtracted from the address to be
released, the resulting address was not within
the expected boundaries.)
24 The header eye-catcher is broken – it should
be ″>>>>″.
28 The trailer is not within the memory pool. (The
address of the free storage trailer was not
within the expected boundaries.)
32 The trailer is beyond the memory pool. (When
the length of the free storage trailer was added
to the address of the trailer, the resulting
address was not within the expected
boundaries.)
36 The trailer eye-catcher is broken – it should be
″CSPS″.
40 The delimiter eye-catcher is broken – it should
be ″