z/VM: System Messages and Codes Š CP - z/VM - IBM
z/VM: System Messages and Codes Š CP - z/VM - IBM
z/VM: System Messages and Codes Š CP - z/VM - IBM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
H<strong>CP</strong>3572E H<strong>CP</strong>3576E<br />
name will identify a specific failing path. If no paths are<br />
defined for the device, resource name will identify the<br />
device itself.<br />
<strong>System</strong> Action: If multiple paths exist to the scsidisk<br />
device, the system will attempt to activate the device via<br />
one or more other paths. If no paths are defined for the<br />
device, it will not be made available for system use.<br />
Operator Response: Examine the return value <strong>and</strong><br />
perhaps other related messages issued at the time of<br />
the failure. Ask the person responsible for system<br />
configuration to check the configuration database <strong>and</strong><br />
verify that the LUN_ID device/path attribute has been<br />
properly specified <strong>and</strong> matches the hardware<br />
configuration. Follow normal procedures for resolving<br />
the problems indicated.<br />
Programmer Response: If the problem persists,<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3572E loadComponent for PCM (pcm) failed.<br />
RC=rc, RSN=rsn.<br />
Function: function<br />
Explanation: loadComponent for the Path Control<br />
Module (PCM) has failed for the reason indicated by the<br />
Return (RC) <strong>and</strong> Reason (RSN) <strong>Codes</strong>. The name of<br />
the PCM component for which loadComponent was<br />
attempted is in parenthesis, <strong>and</strong> was specified in the<br />
DRIVER attribute of the attribute set for the PCM<br />
Extension named in the scsidisk device’s<br />
PCM_EXTENSION attribute.<br />
<strong>System</strong> Action: The system will attempt to activate<br />
the device without multipathing.<br />
Operator Response: Ask the person responsible for<br />
system configuration to check the configuration<br />
database <strong>and</strong> verify that all scsidisk device<br />
PCM_EXTENSION attributes are correctly specified,<br />
<strong>and</strong> that the DRIVER attribute in all PCM_EXTENSION<br />
attribute sets is correct.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3573E scsidisk_config CFG_INIT failed for<br />
device device. return value=value.<br />
Function: function< /mv><br />
Explanation: The CFG_INIT phase of loadDevice<br />
processing for the named scsidisk device has failed for<br />
the reason indicated by the return value. This is a<br />
possible operating system software problem within the<br />
scsidisk driver component.<br />
<strong>System</strong> Action: The device is not made available for<br />
system use.<br />
Operator Response: Follow normal procedures for<br />
reporting operating system software problems.<br />
338 z/<strong>VM</strong>: <strong>System</strong> <strong>Messages</strong> <strong>and</strong> <strong>Codes</strong> — <strong>CP</strong><br />
Programmer Response: Contact your <strong>IBM</strong> Support<br />
Center personnel to diagnose <strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3574E scsi_create_init_structure build DDS<br />
failed for device device.<br />
Function: function<br />
Explanation: An internal phase of loadDevice process<br />
for the named device has failed. One or more additional<br />
messages describing the specific cause of the failure<br />
will likely also to have been issued.<br />
<strong>System</strong> Action: The device is not made available for<br />
system use.<br />
Operator Response: Examine all possibly-related<br />
messages issued at the time of failure <strong>and</strong> take action<br />
as appropriate.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3575E MPIO Config PCM add device failed for<br />
device device. RC=rc, RSN=rsn.<br />
Function: function<br />
Explanation: The loadDevice phase of processing<br />
during which the PCM is notified of the addition of a<br />
new multipath-capable device has failed for the reason<br />
indicated in the Return (RC) <strong>and</strong> Reason (RSN) <strong>Codes</strong>.<br />
This is a possible operating system software problem<br />
within the scsidisk driver component or the Path Control<br />
Module (PCM).<br />
<strong>System</strong> Action: The device is not made available for<br />
system use.<br />
Operator Response: Follow normal procedures for<br />
reporting operating system software problems.<br />
Programmer Response: Contact your <strong>IBM</strong> Support<br />
Center personnel to diagnose <strong>and</strong> correct the problem.<br />
H<strong>CP</strong>3576E MPIO Config get path init data failed<br />
for device device. RC=rc, RSN=rsn.<br />
Function: function<br />
Explanation: An internal multipathing-related phase of<br />
loadDevice processing for the named device has failed.<br />
One or more additional messages describing the<br />
specific cause of the failure will likely also to have been<br />
issued.<br />
<strong>System</strong> Action: The system will attempt to activate<br />
the device without multipathing.<br />
Operator Response: Examine all possibly-related<br />
messages issued at the time of failure <strong>and</strong> take action<br />
as appropriate.<br />
Programmer Response: If the problem persists<br />
contact your <strong>IBM</strong> Support Center personnel to diagnose<br />
<strong>and</strong> correct the problem.
Change language