z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP2277I rdev Subsystem cache is unavailable.
Explanation: The device has reported the following
state change:
Subsystem cache entered the INACTIVE state
indicating that the subsystem cache has been turned
off.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2278I rdev Device caching is active.
Explanation: The device has reported the following
state change:
Device caching entered the ACTIVE state
indicating that the caching for the device is now
available.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2279I rdev Device cache deactivate pending.
Explanation: The device has reported the following
state change:
Device caching entered the PEND (SC) state
This indicates either a failure occurred while attempting
to transfer data from the cache to the backing storage
device, or the deactivation of device cache is still in
progress.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: Contact your system support
personnel if a failure occurred while attempting to
transfer data from the cache to the backing storage
device.
Programmer Response: If a failure occurred while
attempting to transfer data from the cache to the
backing storage device, then examine the EREP
outboard recorder (OBR) record for additional details of
the failure. Refer to the hardware System Reference
Library (SRL) manuals for sense data format and
descriptions. If a hardware problem is indicated, contact
the appropriate hardware service personnel.
HCP2280I rdev Device caching is inactive.
Explanation: The device has reported the following
state change:
Device caching entered the INACTIVE state
indicating that the caching for the device has been
turned off.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2281I rdev Subsystem cache fast write
function is active.
Explanation: The device has reported the following
state change:
Cache fast write entered the ACTIVE state
indicating that the cache fast write function is now
available.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2282I rdev Subsystem cache fast write
function is inactive.
Explanation: The device has reported the following
state change:
Cache fast write entered the PEND (SA) state
indicating that the cache fast write function has been
turned off.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2283I rdev Subsystem non-volatile storage is
available.
Explanation: The device has reported the following
state change:
NVS entered the ACTIVE state
indicating that the nonvolatile storage is now available.
The rdev variable identifies the device reporting the
state change.
System Action: System operation continues.
Operator Response: None.
HCP2277I HCP2283I
Chapter 3. System Messages 279