z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP8015E The variations of this message are
explained below.
MESSAGES:
v INVALID CARD FORMAT:
v Invalid card format:
Explanation: The DEL card data has more than eight
arguments or one of the arguments is more than eight
characters long, or both.
System Action: The extra arguments and characters
are ignored.
User Response: A typing error has probably occurred
in entering a DEL card. Correct the error, and if it
occurred while loading:
The system-
Load the system again.
Some customer-written CP routines-
Enter the CPXLOAD command (or
configuration file statement) again.
HCP8016E The variations of this message are
explained below.
MESSAGES:
v INVALID CARD:
v Invalid card:
Explanation: The control card data is not of the
required format.
System Action: The card is ignored.
User Response: Examine the “HCPLDR Command”
and “Patch Facility” sections of the z/VM: VMSES/E
Introduction and Reference manual and correct the
indicated control card.
HCP8017E The variations of this message are
explained below.
MESSAGES:
v INVALID DATE:
v Invalid date:
Explanation: The date on the END card could not be
translated into the proper month, day, year, and
day-of-week. The day-of-year may be beyond the
number of days in the specified year.
System Action: No date is assigned to the CSECTs in
the indicated object file.
User Response: None is required.
HCP8018E The variations of this message are
explained below.
MESSAGES:
v INVALID FORMAT:
v Invalid format:
Explanation: The SYS card data has no arguments,
more than two arguments, or the second argument is
not a valid hexadecimal address.
System Action: All input records up to and including
the corresponding LDT card are ignored.
User Response: A typing error has probably occurred
in producing the indicated SYS card. Retype it and
reload.
HCP8019E The variations of this message are
explained below.
MESSAGES:
v INVALID PLACEMENT:
v Invalid placement:
Explanation: The PRT control card data specifying the
printer address appears after the first buffer has been
completed or the indicated ICS control card specifies a
CSECT that has already been defined.
System Action: The indicated card is ignored.
User Response: Move the indicated PRT or ICS card
to the front of the load list.
HCP8020E The variations of this message are
explained below.
MESSAGES:
v NO ARGUMENT SPECIFIED:
v No argument specified:
Explanation: The DEL card data has no arguments.
System Action: None. The card has no effect.
User Response: Determine whether a typing error has
occurred.
HCP8021E The variations of this message are
explained below.
MESSAGES:
v OPERAND MISSING:
v Operand missing:
HCP8015E HCP8021E
Explanation: The LDT card data has no arguments.
System Action: The system is unable to obtain a
starting address for system execution. Loading
completes, but system execution is not attempted.
User Response: The user may have erroneously
entered a subsystem using a SYS card that was
Chapter 3. System Messages 423