z/VM: System Messages and Codes Š CP - z/VM - IBM

HCP8349W HCP8371I
HCP8349W INVALID ENTRY, PLEASE RE-ENTER
Explanation: You entered an invalid entry.
System Action: The panel is redisplayed.
User Response: Enter the correct input.
HCP8351E YOU MUST SPECIFY AN OPERAND ON
THE command COMMAND.
Explanation: The command was entered without a
required operand.
System Action: Processing stops.
Operator Response: Reissue the command with a
required operand.
HCP8352E INVALID OPTION(S) / OPERAND(S) op
SPECIFIED ON THE command
COMMAND
Explanation: You entered an invalid option or operand
on the specified command.
System Action: Processing ends.
User Response: Re-enter the command with a valid
operand or option.
HCP8353W UNDEFINED PFKEY
Explanation: You pressed an undefined PF key.
System Action: None.
User Response: None.
HCP8354W ENTER KEY NOT SUPPORTED
Explanation: You pressed the Enter key in a panel in
which the Enter key is not supported.
System Action: None.
User Response: None.
HCP8357I INVALID IP ADDRESS ENTERED
Explanation: You entered an invalid IP address.
System Action: The panel is redisplayed.
User Response: Enter the correct IP address.
HCP8361E addr DOES NOT EXIST
Explanation: You entered an address that is not
defined to the system.
System Action: The panel is redisplayed.
User Response: Enter a valid address.
442 z/VM: System Messages and Codes — CP
HCP8364E NO filename filetype FILE FOUND ON
THE addr DISK
Explanation: An installation EXEC was looking for a
specified file on a specified disk and the file could not
be found.
System Action: Processing stops.
User Response: Contact IBM Support for assistance.
HCP8365E SYNTAX ERROR IN filename filetype
FILE. REASON FOR FAILURE - reason
Explanation: An error was found in the specified file.
System Action: Processing stops.
User Response: Contact IBM Support for assistance.
HCP8366E MINIDISK ERRORS FOR reason /
operation
Explanation: Errors were encountered when
processing minidisks.
System Action: Processing stops.
User Response: Contact IBM Support for assistance.
HCP8367E THE FOLLOWING MINIDISKS { ARE
INVALID | DO NOT EXIST | ARE READ
ONLY | HAVE INVALID DEVTYPES |
ARE INCORRECT SIZE }
Explanation: The specified error was encountered
during minidisk processing.
System Action: Processing ends.
User Response: Contact IBM Support for assistance.
HCP8370E PLEASE CORRECT THE INDICATED
PROBLEMS AND RE-RUN command
Explanation: Correct the indicated disk problems
listed in previously issued error message HCP8367E
and re-run the command.
System Action: Processing ends.
User Response: Correct the errors and reissue the
command.
HCP8371I LOADING component ...
Explanation: The installation EXEC is loading the
specified component into the system.
System Action: Processing continues.
User Response: None.