Original Operating Manual - ROPA Fahrzeug

6.5 Independent heating system (optional)
6.5.1 Operation independent heating system
Time display
Alarm display
Memory
Time of day
Day of the week Operation indication
Program selection
Return
Immediate
Feed heating
115
Timer
Forward
6 Operation
The time of start of heating may be preselected using the timer within a period of up to 7
days. Programming of 3 startup times is possible, whereby only one may be activated.
The timer has an alarm function.
With the ignition switch on, the clock shows the current time of day and the day of the
week. If the heating system is operating, then the display and the keys are lit. After
connecting up power supply, all icons of the display flash. The time of day and the day of
the week must be set.
6.5.2 Operation independent heating system
Operation of the clock is designed so that all flashing icons may be set using the and
keys. If no key is pressed for 5 seconds, then the time displayed is stored. If the keys
and are pressed for more than 2 seconds, then fast mode is activated.
If the ignition is switched off, while the heating system is in permanent heating mode,
then the display shows a residual operating time of 15 minutes and the heating system
remains in operation.
Switching on
Manually: by pressing the key (continuous heating mode)
Automatic: by programming the start of heating
Switching off
Manually: by pressing the key
Automatic: by programming the operating time
With the heating system operating: by setting the residual operating time
Setting the time of day/day of the week
Press key for more than 2 seconds – time of day flashes – set time of day using the
keys and – day of the week flashes – set day of the week.
Chapter 6
Operation