Original Operating Manual - ROPA Fahrzeug

6.7.2 Shutting off the engine without booting up the terminal
6.7.3 Engine speed adjustment
6.7.3.1 Engine speed adjustment - operating mode "Rabbit"
By sliding the X-Y switch (16) to the right/left on the left joystick, it is
possible to switch between driving with manual engine speed control (to
the left)
and automotive driving (to the right). To switch, the X-Y switch (16) must
be slid into the respective direction and shortly held in this position.
Automatic engine speed adjustment (automotive driving)
119
6 Operation
When the parking brake is engaged (toggle switch pressed to the rear), then the engine
may also be shut off by pressing the EMERGENCY-OFF switch. Using this method, the
color terminal continues to operate. After resetting the EMERGENCY-OFF switch, the
engine may be started new.
16
During automotive driving (display on the color terminal: ), adjustment of the engine
speed is exclusively performed using the driving pedal (also known as accelerator or gas
pedal).
Manual adjustment of the engine speed
Manual engine speed adjustment in the operating mode "Rabbit can only
be performed using the manual potentiometer (14). The highest engine
speed is at about 1500 rpm. This variant is best suited for driving on uneven
terrain.
Chapter 6
Operation