Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
6.13.17 Conveyor rollers (drive 2)
Conveyor rollers
7
The conveyor rollers preclean the beets and guide them to the outside. This
achieves a greater cleaning effect due to the longer route.
The conveyor rollers always move in operating direction if the 4-set pinch rollers
also move in operating direction.
To switch on the conveyor rollers (can be switched on jointly with the pickup rollers),
press the button (7) on the right joystick once briefly.
When this button is briefly pressed again, the conveyor rollers/pickup rollers stop.
If this button is pressed and held pressed, then the rotating direction of the conveyor
rollers/pickup rollers is reversed.
192