Original Operating Manual - ROPA Fahrzeug

171
6 Operation
h) Fold in the pickup side sections completely to the end-stop. For this purpose, pull
back diagonally the X-Y button (5) on the right joystick. To fold in faster, press the
multi-function (11) button and keep it pressed in this position. If you then slide the
X-Y button (5) to backward left or backward right, then both pickup side sections are
simultaneously folded in. After fold-in, keep the X-Y button (5) pressed until you can
hear the hydraulic system working against the high pressure. In this way, the pickup
side sections are pressed against the end-stop.
2
5
M4002040D
(2) Display when pickup side sections are folded in
Note! You may only fold in or out the pickup side sections when the central section of
the pickup has been raised to the end-stop and the cab has been completely lowered! If
the central section of the pickup is not at the upper end-stop, then the side sections can
only be folded two-thirds of the way in.
If a machine is located on a slope to the side and the pickup can not be folded in
due to heavy soiling, then first park the machine with the front oriented either uphill
or downhill and fold the pickup in.
i) Switch off axle support
11
Chapter 6
Operation