Original Operating Manual - ROPA Fahrzeug

183
6 Operation
The speed may be set by turning to latching position 6 on the operating panel and
pressing the or buttons. If this drive is stopped, then the drives 1 through 5 (see
drawing) are also stopped. This drive can not be reversed.
If this drive is overloaded, then the following icon is displayed on the color terminal.
If the truck conveyor is blocked, then the color terminal displays the following icon .
6.13.9 Fast speed truck conveyor
Sometimes, a larger quantity of soil sticks to the conveyor – for instance when loading
under unfavorable conditions. To be able to fling this soil off the conveyor, the truck
conveyor is equipped with a fast speed function.
10
You can switch on fast speed using the toggle switch (10). For this purpose, move this
switch upward and hold it for so long, until soiling is removed. If activated, the infeed
conveyor then runs at double speed.
Only switch on fast speed when the conveyor is empty and no beets are on the truck
conveyor any more. The infeed conveyor is automatically stopped for as long as the
truck conveyor is switched to fast speed.
Chapter 6
Operation