Original Operating Manual - ROPA Fahrzeug

6.11.2.3 Setting the rear axle to straight position
11
– Select operating mode "Rabbit".
– Drive slowly (below 10 km/h).
– Unlock main steering switch.
135
6 Operation
– Drive at least 0.5 km/h and briefly press the multi-function button (11) on the joystick.
As a result, the rear axle steers in straight position. The following icon is displayed on
the color terminal.
Then, the main steering switch must IMMEDIATELY be locked again.
M4002040D
If the rear axle is not locked in straight position, then during driving in operating mode
"Rabbit II", the color terminal displays the following warning icon .
Chapter 6
Operation