Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
e) The cabin is raised up to the end-stop.
f) Both fold plates are swung up.
g) The clearing shields fold out.
h) The support feet are extended completely.
i) The pickup side section lowers until it is just above ground level.
j) As soon as these processes are completed, the diesel engine switches to idling
speed.
k) Now move the analog rocker switch (14) back to the center position. If you have
forgotten this, the following is displayed on the color terminal:
Automatic folding has folded out the front of the machine in this state
Note! The fold plates and clearing shields are folded out using a timer. When the oil is
very cold, it may be that the automatic folding mechanism does not move the fold plates
and clearing shields all the way to the end-stop. In this case, please manually perform
the final part of this function using latching position 8 on the operator panel.
Tip: The automatic folding mechanism can also be started by driving slowly in operating
mode "Rabbit" to the beet pile (slower than 8 km/h; NOT permitted when driving on
public roads).
140