Original Operating Manual - ROPA Fahrzeug

e) Fold out truck conveyor. To do this:
159
6 Operation
– Press the multi-function button (11) on the right joystick and keep it pressed.
Simultaneously, lightly pull back on the right joystick to slightly (about 5cm) lift
the truck conveyor above the transport support (3).
– Release the multi-function button (11). Then, carefully push the right joystick
a little to the right, and by this, rotate the truck conveyor out of the vehicle
perimeter.
– Press the multi-function button (11) on the right joystick and keep it pressed,
simultaneously press the right joystick to the right and thereby swing up the truck
conveyor articulation so far, until sufficient distance to the ground is reached.
3
11
Chapter 6
Operation