Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
6.13.16 4-set pinch rollers in the pickup (drive 3)
4-set pinch rollers
8
The 4-set (quadruple) pinch rollers in the pickup move the beets to the center of
the pickup onto the infeed conveyor. They only move in the feed direction when the
machine drive is switched on and the infeed conveyor is running.
These pinch rollers may also be reversed when the infeed conveyor stops.
To switch on the 4-set pinch rollers, briefly press button (8) once on the right
joystick.
If this button is briefly pressed again, the 4-set pinch rollers stop.
If this button is pressed and held pressed, then the rotating direction of the 4-set
pinch rollers is reversed.
190