Original Operating Manual - ROPA Fahrzeug

9 Schedules and Tables/Plans and Diagrams/Maintenance Slips
Maintenance intervals
after the
first 50
oper. hrs.
before
harvest
start daily
Maintenance work
when
needed annually
every 400
oper. hrs.
after the
first 400
oper. hrs.
every 50
oper. hrs.
X
Pickup
Gear unit for pickup rollers, check oil level
Gear unit for pickup rollers, change oil
X X X
Chapter 9
Schedules and Tables/Plans and Diagrams/
Maintenance Slips
every 300,000t of loading performance X
X X
Exchanging the radial shaft seal rings (Simmer
rings) on pickup roller gear unit
Replace hexagon bolts (M20 x 360) and special
M20 nuts on the pickup rollers
Gear unit for pickup rollers, check oil level
X
386
Gear unit for conveyor rollers, change oil
X X X
Gear unit for 4-set pinch rollers, check oil level
X
Gear unit for 4-set pinch rollers, change oil
X X X
Infeed conveyor
Check scrapers and deflecting rollers, retighten if
X X
needed
Replace the drive wheels Depending on soil conditions, every 60,000 - 140,000t of loading
X
performance
Check tightness, retighten if needed X X
Recleaner version with sieve conveyor
Sieve conveyor, check tightness, retighten if
X X
needed
Replace the drive wheels Depending on soil conditions, every 100,000 - 140,000t of loading
X
performance