13.05.2013 Views

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

8 Troubleshooting<br />

Chapter 8<br />

Troubleshooting<br />

Working on the spring-loaded cylinders is dangerous and may only be performed<br />

by persons trained to do this work and who are familiar with<br />

working on preloaded spring assemblies.<br />

Warning! Danger of severe injuries from parts flung away with great force. Never open<br />

the spring-loaded cylinder. The parts inside of the spring-loaded cylinder are preloaded<br />

with high spring force and may be flung away and injure persons if the spring-loaded<br />

cylinders are opened incorrectly.<br />

8.15 Readjusting the brake<br />

Work on the vehicle brakes may only be performed by specialist personnel with<br />

corresponding training (for instance, motor vehicle mechanics, agricultural<br />

machinery mechanics, brake service, etc.) in compliance with the applicable<br />

safety regulations.<br />

The wedge brake is fitted with an automated readjusting device. Readjusting the brake is<br />

therefore not required.<br />

8.16 Hydraulic valves<br />

All hydraulics valves are electrically controlled. Problems on solenoid valves may be<br />

located using specific test cables (<strong>ROPA</strong> Art. Nr. 330197), which are supplied with each<br />

machine. These test cables may only be connected to the solenoid valves by trained and<br />

instructed specialist personnel.<br />

If an electrically controlled valve should malfunction, then in any case, without exception,<br />

call in a specialist. In no case should a try be made, by shaking the solenoid valve<br />

concerned, to remedy possible contact problems or a possible line break. If the valve<br />

is suddenly opened during such tries, then the person concerned may suffer deadly<br />

injuries.<br />

Warning! Troubleshooting and fault repairs on all components of the hydraulic system<br />

are exclusively the task of trained specialists. We expressly warn against attempts<br />

to repair or arbitrary tests in unauthorized manner on electromagnetically operated<br />

hydraulic valves. If, during such tests or attempts to repair, parts of the hydraulics system<br />

are suddenly pressurized, this may lead to unintentional machine movements. This may<br />

jam persons or even lead to crush injuries.<br />

374

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!