13.05.2013 Views

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Light Emitting Diode, LED Light Emitting Diode, LED<br />

1<br />

2<br />

121<br />

6 Operation<br />

6.8.1 Switching gears (gear shifting)<br />

The transmission is used to switch between the operating modes "Turtle" and "Rabbit"<br />

as well as between gear I and gear II. The color terminal displays the icon of the<br />

currently active combination of operating mode and gear.<br />

In the operating mode "Turtle", the boarding steps are swung out and the warning signs<br />

on the pile pickup swing up.<br />

Driving speeds:<br />

<strong>Operating</strong> mode "Turtle I": 0-0.7 km/h<br />

<strong>Operating</strong> mode "Rabbit I": 0-10.3 km/h <strong>Operating</strong> mode "Rabbit II":<br />

Gear-shifting process<br />

– Engage the parking brake.<br />

– Set the engine to idling speed.<br />

0-20 km/h (respectively 25 km/h / 32 km/h)<br />

– Select the desired combination of operating mode and gear using the keys (1) and<br />

(2) of the operating section:<br />

Select operating mode button (1): "Turtle"/"Rabbit";<br />

Select gear button (2): I/II.<br />

– When switching to another operating mode, a sound may be heard ("clack").<br />

– If one of the two key LEDs and the icon on the color terminal are flashing after<br />

switching, then the transmission is under tension. Release the parking brake and<br />

drive very carefully (!) and very slowly forward or backward. The transmission<br />

will now audibly switch. In spite of this, check if the icon for the selected operating<br />

mode is visible on the color terminal and if the key LED of the operating section is<br />

constantly lit.<br />

Note! Danger of severe damage to the transmission.<br />

Please observe the above hints in any case! Transmission damage caused by noncompliance<br />

or imprecise compliance is excluded from any guarantee or warranty!<br />

The keys for switching between the operating modes may ONLY be used if the machine<br />

is standing completely still (0.0 km/h). Additionally, sufficient pressure must be present<br />

in the compressed air system. This is the case, when the icon is no longer displayed<br />

on the color terminal. If you do not comply with this instruction, then this may lead to<br />

destruction of the transmission.<br />

Chapter 6<br />

Operation

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!