Original Operating Manual - ROPA Fahrzeug

265
7 Maintenance and Care
Proceed as follows for cleaning the cooling system:
– Switch off the engine and secure the machine against inadvertent starting (withdraw
the ignition key and carry it on your body).
– Swing down the rear platform wall (4).
– Clean the air intake grille using a brush and – if necessary – using the water jet from
a water hose in order to remove dirt that may be adhering to the system.
– Swing up the air intake grille (5).
– Swing up the platform rear wall, close the cab door and start the engine. Wait for the
sequence of automatic reversal of the fan.
4
(4) Platform rear wall
Attention! Risk of eye and skin injuries due to foreign objects blown out. There may be
no-one on the boarding platform during automatic reversal. Due to the strong air current
of the fan, eye and skin injuries can be caused by dirt particles flung away by the air
current.
5
(5) Air intake grille
Chapter 7
Maintenance and Care