Original Operating Manual - ROPA Fahrzeug

(1) Indicator pin
225
6 Operation
After an operating period of 20 minutes, the central lubricating system switches back to
"Auto" (automatic).
Regularly check the lubricating pipe system. Check daily whether the lubricating
system works without fault. One possibility is controlling the two respectively three main
distributors. An indicator pin is installed there for checking functionality.
This indicator pin (1) moves slowly when the grease flows through the main distributor.
This shows whether the pump element of this lubricating circuit is operating.
1
1
Main distributor for pickup and subdistributor for pickup
Main distributor on chassis
Additional lubricating nipples for manual intermediate lubrications or troubleshooting
attempts.
Chapter 6
Operation