Original Operating Manual - ROPA Fahrzeug

9 Schedules and Tables/Plans and Diagrams/Maintenance Slips
9.3 Lubricating plan for euro-Maus4 (lubrication using grease
gun)
Chapter 9
Schedules and Tables/Plans and Diagrams/
Maintenance Slips
Number Interval
of (oper.
Lubricating point
nipples hrs.)
Telescoping unit of pile pickup (cover with grease) 4 as
needed
Swivel head of hydraulic cylinder for folding pickup, inside 2 100
Bolts on pickup-folding cylinder 2 100
Swivel joint of hydraulic cylinder for raising pickup, top 2 100
Support foot pivot point, left and right 2 100
Swivel point residual beet pickup 1 100
Swivel heads for pile pickup hydraulic cylinder, right/left 4 100
Swivel heads for pile pickup hydraulic cylinder, up/down 2 100
Self-steering for front additional axle 2 100
Axle support cylinder 4 100
Load cylinder for additional axles, rear/front (4 each) 8 200
Locking lever roller for swivel arm 1 200
Pivot point of locking lever for swivel arm 1 200
Universal joints in front axle and rear axle 8 200
Cardan shafts from transmission to the axles 4 200
Nipple block next to the tank supports 8 200
Intermediate lever - residual beet pickup turning sensor 1 yearly
Counterweight arm locking lever 4 yearly
Pivot point for underride protection 2 yearly
Attachment for recleaner, rear (from model year 2012) 6 200
Cylinder swivel head for swivelling recleaner 1 200
Lubricating grease
Grease as per DIN 51825, NLGI class 2, type: KP2K-20, at low outdoor
temperatures KP2K-30.
All lubricating points must also be lubricated after every washing of the machine. After
washing of the machine, the central lubrication system must also lubricate using at least
2 intermediate lubrication cycles.
388