Original Operating Manual - ROPA Fahrzeug

8 Troubleshooting
Chapter 8
Troubleshooting
8.2.3 Electronic cut-outs
The fuses (F70r to F100r) are implemented as self-resetting electronic cut-outs. If the
red light emitting diode (LED) of a cut-out is lit, then the cut-out is overloaded and power
supply to the component connected is interrupted.
8.2.4 Schedule of fuses / electronic cut-outs
Electronic automatic-resetting cut-outs with LED
No. f. comp. Function Pos. in the machine
Sensors operating at 15 volts
F70r B26 DS traction drive, forward, 15V in central electric cabinet, 15 V
B61 DS braking pressure service brake
F71r B20 DS Pickup rollers 15V in central electric cabinet, 15 V
B21 DS pinch rollers 4-set (quadruple), 15V
F72r B22 DS Recleaner, 15V in central electric cabinet, 15 V
B27 DS Additional axles, 15V
F73r B68 DS relief pickup, right, 15V in central electric cabinet, 15V
B69 DS relief pickup, left, 15V
F74r B377 DS Fuel pressure, 15V in central electric cabinet, 15V
B60 DS Pressure sensor for air tank, 15V
F75r B84 DS traction drive, reverse, 15V in central electric cabinet, 15V
B85 DS PS clutch PVG
F76r B80 DS Emergency steering pump, 15V in central electric cabinet, 15V
B94 Sensor for telescoping pile pickup
F77r B46 Fuel tank level sensor, 15V in central electric cabinet, 15V
B67 DS Relief for pickup, center
F78r B83 DS Pickup conveyor rollers, 15V in central electric cabinet, 15V
328