13.05.2013 Views

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Proceed as follows for the oil change:<br />

287<br />

7 Maintenance and Care<br />

Attention! Risk of injury! Immobilize euro-Maus4 each time and shut off the engine<br />

before performing an oil change on the individual planetary gear units. The machine must<br />

be secured against inadvertent starting of the engine. All maintenance and repair work<br />

may only be performed by trained specialist personnel.<br />

Danger from hot oil escaping under pressure! The oil of the planetary gear units<br />

may become very hot under certain circumstances and – due to heating up – may be<br />

pressurized. When performing an oil change on the planetary gear units, always wear<br />

gloves and suitable protective clothing. Always first unscrew the oil filler plug very slowly<br />

and with due care, so that the pressure which may have built up in the planetary gear<br />

units can be relieved safely.<br />

– Change the oil only with the gear units at operating temperature. Park the machine<br />

on level ground. The oil level inspection plug ("Oil Level") (1) is horizontal (see<br />

illustration).<br />

– Place a catch pan of sufficient size underneath.<br />

– Open the oil drain plug (2) and the oil level inspection plug and let the old oil drain<br />

off.<br />

1<br />

– Screw in the oil drain plug again.<br />

– Fill the planetary gear unit with the supplied <strong>ROPA</strong> planetary oil filler so that the oil<br />

level reaches the lower edge of the oil level inspection opening.<br />

– Screw the oil level inspection plug back in again.<br />

– Wait around 15 minutes and recheck the oil level. If needed, add a little oil.<br />

Tightening torque for the 3 plugs: 50 Nm<br />

Note! Use the <strong>ROPA</strong> planetary oil filler to add the oil (<strong>ROPA</strong> special tool Item No.<br />

018143). You can exactly and easily add the corresponding oil quantity using this special<br />

tool.<br />

Prescribed gear oil: Gear oil API GL 5, SAE 90<br />

3<br />

2<br />

Filling capacity: per planetary gear on the front and rear axle<br />

approx. 3.5 liters<br />

(1) Oil level inspection plug<br />

(2) Oil drain plug<br />

(3) Bleeding when filling with oil<br />

Oil level<br />

Planetary gear unit, front and rear axle<br />

Chapter 7<br />

Maintenance and Care

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!