Original Operating Manual - ROPA Fahrzeug

6.3.4 Main menu
99
6 Operation
All submenus of the main menu may be directly accessed by entering the respective
menu code.
M4002040GB
6.3.4.1 Loading settings
Menu code 1
Menu code 2
Menu code 3
Menu code 4
Menu code 5
Menu code 6
After confirmation of the selection, the following menu is displayed:
M4002050GB
The desired menu item is navigated
using the rotary knob and selected by
pressing the middle of the rotary knob. This
activates the associated bar graph.
The recommendation of the manufacturer
is always the value of 0. Deviations may
be set by the driver, if desired, from -10 to
+10.
-values = the hydraulic circuit reacts more
sluggishly +values = the hydraulic circuit
reacts more aggressively
You may comfortably store your personal loading settings (those are all settings
displayed on the color terminal) on your personal USB stick using the function "Export".
This way, your settings are not lost in case of possible change of drivers. When starting
your next work shift, you can transfer these settings from the USB stick to the machine
using the function "Import". The function "Reset to factory settings" resets all settings in
this menu to "0".
Chapter 6
Operation