Original Operating Manual - ROPA Fahrzeug

229
6 Operation
The cameras are maintenance-free. When the image quality deteriorates, you should
clean the lens cover using a soft, clean and lightly moistened cloth. During cleaning,
make sure that you do not scratch the lens cover.
Video monitor operating controls from model year 2011
Monitor ON/OFF
Calling up and switching of the menus in their displayed sequence:
Brightness Brightness - 0(MIN) ... 60(MAX)
Contrast Contrast - 0(MIN) ... 60(MAX)
Color Color saturation - 0(MIN) ... 60(MAX)
Standard Reset to factory settings
Language Language - English, French, German, Spanish,
Portuguese, Italian, Polish
Mirroring The camera picture is mirrored. Pressing the
menu item "Enter" navigates you back to the main menu.
Use menu item "End" to exit the menu.
Video PAL, NTSC, Auto
Poc OFF/ON. Monitor is started when the ignition is switched on.
OFF Monitor can be switched ON/OFF via the monitor.
Timer ON/OFF Automatic camera switching ON/OFF
Timer setup Setting of the display time for each individual camera
in timer mode.
Selection button "Plus"
Selection button "Minus"
Day / Night switching
CAM Use this button to switch between single frame mode for Camera 1, Camera 2,
Camera 3 and Camera 4. Split frame mode enables
switching between Cameras 1/2, 2/3, 3/4 and Cameras 4/1. In
divide-in-thirds and divide-in-quarters frame mode, this button is not assigned any
function. The
camera selection is only possible if none of the control cables is used.
MODE Pressing the Mode button enables switching between the individual view modes
(single frame, split frame, divide-frame-in-thirds and divide-frame-in-quarters
frame).
Chapter 6
Operation