Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
e) Raise the central part of the pickup as far as possible. For this purpose, pull the
mini-joystick (1) on the right joystick backwards.
M4000421D
26
170
1
f) Swing down the fold plates to the end-stop. Turn the rotary switch to click-in position
8 and press button and hold until the fold plates, clearing shields and support feet
move completely into the transport position.
(26) The pickup height
must display at least 98%
g) Lower the cabin completely to the end-stop. To do so, press down the toggle switch
(5) until the cabin has been completely lowered.
Danger! Make sure that no persons are located in the hazard zone in front and the
boarding platform (risk of injury).
The cab may only be lowered or raised when the pickup side sections are folded out.