Original Operating Manual - ROPA Fahrzeug

6.13.21 Loading transport vehicle
197
6 Operation
6.13.20 Driving into the beet pile – Loading mode - START
If no transport vehicle is already located under the truck conveyor for load-receiving
purposes, then, before switching on the machine drive, open the menu "Special
functions", scroll to the line "Loading mode" and change the "LOAD" (default) to
"START". This enables you to drive the machine into the beet pile with running pickup
6 without moving the other sections of the beet flow.
As soon as you switch off the machine drive (yellow button (6) on the left joystick), the
loading mode is automatically reset to "LOAD".
M4001390GB
M4000041D
When loading on transport vehicles, always comply with the following tips for treating the
beets as caringly as possible during loading.
– In all cases, avoid any change in direction of the beet flow that amounts to 90° or
more between infeed conveyor, recleaner and truck conveyor!
Gentle treatment beet flow
1
(1) Recognition sign for the activated
START
loading mode
Chapter 6
Operation