Original Operating Manual - ROPA Fahrzeug

191
6 Operation
Move the rotating selector switch to position 3 to adjust the speed of the 4-set pinch
rollers.
By pressing the buttons / , you change the speed of the 4-set pinch rollers.
button = Increase speed (more aggressive cleaning and transport).
button = Reduce speed (gentler cleaning and transport).
The speed of the 4-set pinch rollers may be adjusted in 11 stages (0-10 and additionally
"MAX").
To treat the beets are carefully as possible, the speed of the 4-set pinch rollers should
not be selected higher than necessary.
The stage "MAX" should only be used in case of extremely sticky soil. In this stage,
the speed of the 4-set pinch rollers only depends on the speed of the diesel engine. To
switch on the stage "MAX", press and hold the button until the color terminal displays
the stage "MAX" indicator.
If the warning limit is exceeded for the 4-set pinch rollers, then the following warning icon
is displayed on the color terminal .
If the 4-set pinch rollers are blocked, then the color terminal displays the following
warning icon .
In case the 4-set (quadruple) pinch rollers are blocked, then both the conveyor roller
drive and the pickup roller drive are switched off.
Chapter 6
Operation