Original Operating Manual - ROPA Fahrzeug

8 Troubleshooting
Chapter 8
Troubleshooting
8.5 Troubleshooting using the color terminal
Some malfunctions are indicated on the color terminal by warning symbols.
In case of electrical or electronic problems, the components concerned are shown,
naming the component.
Example:
= Communication problem with control unit
A03 = computer EST C (see table below).
= Analog signal in inadmissible range.
On the color terminal, to the right of the warning symbol, the text field shows which
sensor signal is out of range.
= Line discontinuity or short-circuit was determined.
To the right, beside the warning icon, an indication is made on the color terminal whether
this concerns a line break or a short circuit.
You are also informed about which component is concerned.
= Internal memory error EEPROM.
Error on readout of parameters.
332
M4000332GB
M4000331GB