Original Operating Manual - ROPA Fahrzeug

6.25.3.1 Set the weighing indicator to "0"
M4000026GB
M4000025GB
11
12
13
4
2. By pressing the button on the color terminal.
237
6 Operation
On the color terminal, there are two methods to set the weighing indicator to "0" after
changing the load-receiving transport vehicle.
1. Use the buttons on the right joystick to reset to "0". To do this, simultaneously press
and briefly hold down buttons (11), (12) and (13).
Note! We generally recommend usage of the 3 buttons on the joystick so as to avoid an
extreme overuse of button .
Chapter 6
Operation