Original Operating Manual - ROPA Fahrzeug

6 Operation
2
14
Chapter 6
Operation
28
M4000021D
Selecting "YES" activates the automatic system for the traction drive. Now press
button (2) to switch on the feed. After switching off the machine drive, the display field
for traction drive status (28) flashes. This means that: after the next switch-on of the
machine drive, forward driving motion starts automatically (as soon as the pickup rollers
start to rotate). Pressing button (2) is therefore no longer required. This function remain
activated until the next change of operating mode or until the next boot of the computer.
For safety reasons, pressing button (3) also switches off the automatic feed switch-on.
6.9.3.2 Driving in reverse in operating mode Turtle
3
6
However, if you wish to reactivate the currently deactivated automatic feed switch-on,
then you can do so by selecting the "Automatic traction drive" in the "Special functions”
menu.
If reverse driving is activated via button (3), then the icon . appears on the terminal.
This button switches on the reverse drive direction of the traction drive for as long as the
button is pressed. (3).
If euro-Maus4 is driving forward during loading, then you can stop this movement
by pressing this button. While driving in reverse, speed control using the manual
potentiometer is not possible. The machine always drives backwards at the maximum
possible speed.
In addition, the traction drive may be stopped as follows:
– Pressing the EMERGENCY-STOP button
– Briefly pressing the footswitch for driving direction
– Engaging of the parking brake.
130
M4001410GB M4001420GB M4001430GB