13.05.2013 Views

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

Original Operating Manual - ROPA Fahrzeug

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Safety circuit for residual beet pickup<br />

M4000044D<br />

3<br />

207<br />

6 Operation<br />

Danger! There is a hazard of very severe or even deadly injuries for people staying<br />

in the hazard zone. Objects or people may be caught by their body parts or pieces of<br />

clothing and drawn into the rollers, especially near the pickup. In this case, body parts<br />

may be ripped off and fragmented. Objects may be drawn in by the rollers and destroyed<br />

or cause severe damage to the pickup of the machine. The operator is obliged to<br />

immediately shut down the machine, as soon as people enter the hazard zone or ingress<br />

into it with objects.<br />

As long as the machine is running, it is expressly prohibited to manually place into the<br />

machine any sugar beets that were not automatically lifted by the machine (this also<br />

applies to use of hand tools). Please always bear in mind that residual beet pickup<br />

activities have lead to very serious accidents in the past.<br />

Pile pickup up<br />

As long as the pile pickup is lifted up sufficiently high, the indication for the pile pickup<br />

height (3) on the color terminal is displayed highlighted in green. The green color<br />

indicates that the safety circuit has no effect during loading. As long as it does not lower<br />

under a certain minimum height, the pile pickup may be used without restrictions (for<br />

instance, in a half-frozen beet pile).<br />

Pile pickup down<br />

If the height indication for the pile pickup (3) is displayed highlighted in orange,<br />

because the pile pickup is lowered, then the telescopic arm may only be moved left/<br />

right and up/down without additional measures. When the telescopic arm is to be<br />

extended or retracted, the driver's seat must be turned to the front . The rotatable seat<br />

status indicator (1) on the color terminal must display green (display range between<br />

-20%/0%/+20%). In addition, the "look forward" foot-switch (2) on the cabin floor must be<br />

pressed.<br />

2<br />

08000004<br />

1<br />

Chapter 6<br />

Operation

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!