Original Operating Manual - ROPA Fahrzeug

5 Operating Components
Chapter 5
Operating Components
7
8
Button (7) Drive quadruple pinch rollers ON/OFF/Reverse
Button (8) Drive quadruple pinch rollers ON/OFF/Reverse
Button (9) Recleaner drive ON/OFF/Reverse
Button (10) Infeed conveyor drive ON/OFF
(no reversing on sieve conveyor version)
Multi-function button (11) ONLY in operating mode Turtle AND in conjunction with
X-Y switch (4) or (5)
Adjust both support feet at the same time or
fold in both pickup side sections at the same time.
Multi-function button (11) ONLY in operating mode Rabbit
Set rear axle to center position.
Buttons (12) and (13) ONLY in operating mode Turtle
Briefly press both buttons simultaneously and keep them pressed
In addition, briefly push the left joystick to the:
10
Front left = Automatic residual beet pickup function starts at the left
Front right = Automatic residual beet pickup function starts at the right
Buttons (12) and (13) ONLY in operating mode Rabbit
Briefly press both buttons simultaneously
Activate all-wheel steering
74
9
11
12
13