Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
The 2kg supply reservoir for the grease pump is filled up using the lever on the large
grease bucket. Never completely fill up the 2-kg supply reservoir of the grease pump.
Only fill up the supply reservoir for the grease pump to 90% of its maximum capacity.
In this way, you avoid blocking of the ventilation pipe on the 2-kg supply reservoir. If the
bleeding pipe is filled up with grease, then the system is no longer able to supply grease
to the grease points anymore.
6.19.1 Filling up the grease gun
(1) Shutoff cock
(2) Nipple for filling up the grease gun
A stop valve (1) with a plug-in connector is located in the supply hose to the lubricating
pump. This allows the grease gun from vehicle tools to be filled up directly from the
grease bucket. For this purpose, press the hand lever grease gun into the connecting
nipple (2) and close the stop valve. When you press the lever on the grease bucket, the
grease gun is filled up with lubricating grease.
6.19.2 Intermediate lubrication
The lubrication system may at any time be manually activated. To do this, call up the
menu "Special functions" on the color terminal. Scroll to the line "Central lubrication" and
change the selection from "AUTO" to "ON".
M4001440GB
224
M4001450D M4001460GB
2
1