Original Operating Manual - ROPA Fahrzeug

6 Operation
Chapter 6
Operation
6.12 Fold-in and fold-out of the machine
– Switch on operating mode Turtle I.
b) Before fold-out, remove securing chains for the pickup and insert them into the
hooks on the vehicle frame provided for this purpose.
– Always switch on the axle support of the rear axle before fold-out. To do this, flip
toggle switch (12) downward.
12
– If at all possible, use automatic fold-out to fold out the machine (thereby minimizing
the setup time).
138
M4000021D
Note! Do not intentionally lower the pickup into the securing chains. Hazard of damage
to the machine.