Original Operating Manual - ROPA Fahrzeug

189
6 Operation
6.13.15 Infeed conveyor fast speed
Sometimes, a larger quantity of dirt sticks mainly in the section of the infeed and the
deflection rollers of the infeed conveyor. This usually happens when loading under very
unfavorable conditions. To be able to fling this soil off the conveyor, the truck conveyor is
fitted with a fast speed function.
10
You can switch on fast speed using the toggle switch (10). For this purpose, tip this
switch downward and hold it pressed until soiling is removed. The infeed conveyor then
runs at double speed.
Only switch on fast speed when the infeed conveyor is empty and no beets are on the
infeed conveyor anymore.
Briefly switch on fast speed if a "roll" made of soil and other contamination develops in
the section behind the deflecting roller. Fast speed removes this roll of dirt as long as it
does not exceed a specific size. Otherwise, the dirt must be manually removed.
If the recleaner is blocked, then the infeed conveyor automatically shuts off. As soon as
a blockage of the recleaner has been removed, then the infeed conveyor can be started
again by briefly pressing on the button (10) on the right joystick.
Chapter 6
Operation