Download - SoftMaker

Searching
You can search a document for a specific term using the Edit > Search command
(keyboard shortcut (Ctrl)(F)).
It is even possible to search for formatting – for example for all passages in bold
characters (see section “Searching/replacing formatting” beginning on page 153).
You perform a text search as follows:
1. Invoke the Edit > Search command.
2. Under Search for, enter the text for which you want to search.
3. As necessary, check the options for the search (see section “Expanded search
options” beginning on page 150).
4. Click on the Search button to begin the search.
When TextMaker finds the search text, it scrolls to its position in the document and
selects it.
You can then do either of the following:
A) You can click on Search again, to proceed to the next occurrence of the search
text.
B) You can click on Close to end the search and close the search dialog.
You can not only search for a specific text, but also replace it with something else.
You will read about this in the next section.
148 Searching and replacing Manual TextMaker