Download - SoftMaker

Linear Gradient, Rectangular Gradient etc.
The lowermost five fill types in the list allow you to fill the object using a
gradient. First, open the Fill type list and select the desired type of gradient.
Then, select one of the subtypes in the Variants list.
In the Options section, the following additional settings can be made:
X offset and Y offset can be used to move the center of the gradient. Angle
rotates the gradient.
Hint: You can also modify these settings by moving or rotating the cross-hair
displayed in the Sample field using the mouse.
If you check the Double gradient option, for example, a black-white gradient
will become a black-white-black gradient.
In the Colors section, the colors can be adjusted as follows:
If you want to change the gradient colors, click one of the triangles below the
bar representing the gradient. Then, select a color from the Color list.
Use the triangle on the left to change the start color and the triangle on the right
to change the end color.
If desired, you can also change the Transparency of the selected color. Values
between 0% (no transparency) and 100% (full transparency) are permitted.
Additional colors can be added to the gradient by double-clicking on the
desired position in the bar and selecting a color. To remove a color, doubleclick
the triangle representing that color.
Object properties, Lines property sheet
Note: This property sheet is available only for certain types of objects.
Use the Lines property sheet to modify the lines that encompass the object or its
border lines.
When applied to drawings, these settings affect the lines used to paint the object
itself. When applied to other types of objects, the border lines surrounding the
object are affected.
Options available:
Manual TextMaker Frames and drawings 245