Download - SoftMaker

AVM FRITZ!fax version 2.0 and later
Of course you also need the corresponding hardware – be it a fax modem, a multifunction
printer, a router, or any other fax device that is supported by your fax
software.
Note: If you have a different fax program, you can, of course, continue to use it. If
you choose to do so, you must follow the procedure for faxing described in your
fax software manual. You will not be able to use TextMaker’s extended fax support
or the form fax function, since these work only with the programs listed above.
Starting a fax transmission
When you want to send a document by fax, invoke the command File > Send >
Fax, rather than the command File > Print.
A dialog box appears, allowing you to make the following settings:
Fax device
Here, choose the fax driver that was installed by your fax software (for example,
“Microsoft Fax on FAX:”).
Setup button
If you click on this button, you will get the setup dialog for your fax software.
You can use it to configure your fax program (see your fax software manual).
Manual TextMaker Outputting documents 457