Download - SoftMaker

If the Keep aspect ratio option is checked, modifying the object’s height
adjusts its width automatically, keeping the object proportional (and vice versa
when modifying the object’s width).
Rotation group box
Available only for drawings and pictures.
Here you can rotate the object. To do this, enter the angle about which the
object is to be rotated (positive values correspond to clockwise rotation).
Flip group box
Available only for drawings and pictures.
Here you can flip the object vertically or horizontally.
Object properties, Filling property sheet
Note: This property sheet is available only for certain types of objects. When
applied to pictures, the filling will be visible only in pictures that contain transparent
areas.
Use the Filling property sheet to modify the filling of objects as follows:
First, select the desired type of filling in the Fill type list. Based on the fill type
selected, a series of options will be displayed. You can then change those settings
for the chosen fill type, as desired.
The following fill types and settings are available:
No Filling
If you select the first fill type in the list, the object is not filled and thus remains
transparent.
Color
Fills the object using a uniform color shade. To change the color, select it in the
Colors list.
If none of the existing colors suits you, you can always compose your own
colors. To do this, click on the More colors button and proceed as described in
the section “Document properties, Colors property sheet” beginning on page
526.
Manual TextMaker Frames and drawings 243