Download - SoftMaker

6. Don’t forget: Click on Add to assign this shortcut to the command.
7. Confirm with OK and exit the main dialog box with Close.
From now on, you can execute the Format > Standard command with the key
combination (Ctrl)(F12).
Available keyboard shortcuts
Notice that some of the keystroke combinations that are possible on your keyboard
are not allowed as shortcuts.
As a rule, you should use alphabetic keys, numeric keys or function keys for
shortcuts. You can combine them with (Ctrl), (Alt) and/or the Shift key (Shiftª).
You can easily check to see if the key combination you want to use is allowed.
Click into the Please press accelerator field, and then try to enter your key combination.
If it does not appear in the field, it is not allowed.
Some examples of valid keyboard shortcuts include:
(Ctrl)(A)
(Alt)(A) (However, key combinations including the Alt key are not recommended,
since they are usually occupied by the main menu entries).
(Ctrl)(Alt)(A)
(Ctrl)(Shiftª)(A)
(Ctrl)(Alt)(Shiftª)(A)
(Ctrl)(F1)
etc.
Note: Alphabetic keys by themselves are not allowed. Thus, you cannot use (A)
or (Shiftª)(A) as a shortcut.
Shortcut already assigned: If you press a shortcut that is already assigned, the current
assignment will be shown just below the entry field. You should press the Backspace
key (æ__) to delete your shortcut and try a different shortcut. Otherwise, you
will overwrite the existing assignment for the shortcut.
Two part shortcuts: You can also use two part shortcuts (in accordance with the
WordStar standard), for example, (Ctrl)(K)(X). However, in this case only shortcuts
of the form “Ctrl + letter + letter” are allowed.
548 Customizing TextMaker Manual TextMaker