Download - SoftMaker

3. In the Tabs edit box, enter the desired position relative to the left page margin –
thus, “0” corresponds to the left page margin.
4. If desired, select another Alignment and another Tab leader for the tab stop
(see the next pages).
5. Don’t forget: Click on the Set button.
6. Set up any additional tab stops you need in the same way before you exit the
dialog box with OK.
Once tab stops have been set, you can use the (Tab) key to insert tabs in the text to
move from one tab stop to the next.
Note: You can also use this dialog to enter the Default width for the predefined
tab stops mentioned earlier (normally 0.5 inch). However, once you have defined
your own tab stops for a given paragraph, the predefined tab stops are ignored.
Tab alignment
Using Format > Tabs, you can specify not only the position for a new tab stop, but
also its alignment:
Alignment
Left
Right
Function
A normal tab stop similar to one on a typewriter. The tab stop
determines where the following text begins.
Here the text following the tab is aligned flush right. Thus, the
tab stop determines where the text ends.
Manual TextMaker Paragraph formatting 85