Download - SoftMaker

First line number is the number with which the line numbering should begin.
Increment is the interval between numbered lines. For example, if you enter 5,
line numbers will appear only at lines 5, 10, 15, 20 etc.
Distance to text is the amount of blank space TextMaker should leave between
the line number and the left margin.
Numbering group box
Allows you to specify whether and at what place the numbering should be
reset:
Restart at the beginning of this section: The numbering is reset to 1 only at
the beginning of the current section. Tip: You can define new sections with the
Insert > Break > Section break command.
Restart on every page: The numbering is reset to 1 at the beginning of every
page of the document.
Continuous: The numbering is not reset to 1.
Apply to:
Determines what parts of the document will be affected by the settings you
make in this dialog:
Whole document: the entire document.
This point forward: that part of the document beginning at the current position
of the text cursor and ending at the end of the document.
Selected text: the selected text.
Current section: the current section. Tip: You can use the Insert > Break >
Section break command to split up the document into as many sections as you
want.
Selected sections: all sections included in the current selection.
To end of section: the segment of text beginning at the current position of the
text cursor and ending at the end of the current section.
Manual TextMaker Automatic numbering 185