Download - SoftMaker

Pages
Here you can choose to fax the entire document, only the current page, or a
specific range of pages.
High resolution
Faxes are usually sent in “normal” resolution. If you enable the High resolution
option, the fax will be sent with finer quality, but the transmission will take
longer.
Drop pictures
If this option is enabled, TextMaker skips over any pictures, drawings and OLE
objects inserted into the document when transmitting it.
Extended fax support
This option is available only when a fax program compatible with TextMaker is
installed on your PC (see section “Requirements for extended fax support” on
page 456).
In this case, this option should not be disabled. If you disable it, the extended
fax functions described in this chapter will not be operable. TextMaker will
route the fax directly to your fax software, which will require you to supply the
name and fax number of the recipient.
When you confirm with OK, a dialog will appear and allows additional settings for
the fax transmission to be made (see the next section).
Settings for fax transmissions
When you exit the File > Send > Fax dialog box with OK, another dialog box
appears. It allows you to specify the recipient’s fax number and name.
By the way, instead of entering the required settings in this dialog box, you can
enter them ahead of time in the Fax property sheet in the dialog box for the File >
Properties command.
Tip: When you use a suitable document template for faxing, as recommended in
section “A fax in five minutes” beginning on page 455, this dialog box has already
been filled out for you. Several such document templates are included in
the TextMaker distribution. Simply invoke File > New and choose one of the
templates in the Fax folder.
458 Outputting documents Manual TextMaker