Download - SoftMaker

Cell1;Cell2
Cell3;Cell4
Each row becomes a separate paragraph. The Separator is inserted between the
contents of each cell in every row. Depending on the separator you select, you will
get the following results:
Separator
Paragraph break
Tabs
Semicolon
User defined
Result
Here a new paragraph is started for each separate cell in the
table.
A new paragraph is started at the end of every row in the
table. The contents of the cells in each row are separated by
tabs.
A new paragraph is started at the end of every row. The
contents of the cells in each row are separated by semicolons
(;).
Here you can specify the separator yourself. To do this, enter
the desired character in the edit box. You can enter more than
one character if desired.
For example, if you enter a comma followed by a space as
the separator, the cell contents of every line will be separated
by a comma and a space accordingly.
It is also possible to proceed in the opposite way: you can convert text in tabular
form into a table (see the next section.)
Converting text into a table
The previous section described how to convert a table into paragraphs of text. It is
also possible to proceed in the opposite direction: with the Table > Convert Text
to Table command you can convert text in tabular form into a table.
To do this, proceed as follows:
1. Select the paragraphs of text that you want to convert into a table.
2. Invoke the Table > Convert Text to Table command.
3. First, select the Separator that is used to delimit the entries in the text (see
below).
Manual TextMaker Tables 203