Download - SoftMaker

Pasting with special formatting
In addition to common clipboard operations like Cut, Copy, and Paste, TextMaker
offers the Edit > Paste Special command which gives you more control over how
text or objects are pasted into TextMaker.
When you place information in the clipboard using Edit > Cut or Edit > Copy,
this information is saved there in several formats. For example, if you cut or copy
text, the text is saved both in formatted form and in unformatted form.
Normally, you don’t need to be concerned about this, because TextMaker automatically
selects the most appropriate format when it inserts the content of the clipboard
into your document in response to an Edit > Paste command. However, if
you need to, you can select the format in which the content is to be inserted yourself.
You use the Edit > Paste Special command to do this.
When you invoke this command, a dialog box appears and presents you with a list
of all the formats in which the information currently residing in the clipboard is
saved. When you select a format and then confirm with OK, the content of the
clipboard is inserted in the selected format.
Inserting a document
With the Insert > Document command, you can insert a complete TextMaker
document into the current document.
To do this, proceed as follows:
1. Move the text cursor to the position in the current document at which the other
document is to be inserted.
2. Invoke the command Insert > Document.
3. A dialog box opens and allows you to select the document to be inserted.
4. After making your selection, confirm with OK.
The selected document is inserted.
Manual TextMaker Working with selections 61