Download - SoftMaker

whenever you need them. In addition, numbered lists can have hierarchical
numbering (1., 1.1., 1.1.1. etc.).
You will find information about numbered lists in section “Numbered lists”
beginning on page 174.
Using user-defined bullets
If the bullets presented in the dialog described above are not sufficient, you can
select from many custom symbols to choose a bullet.
Recall that the dialog box for this command presents two rows of bullet icons: The
bullets in the Default row cannot be modified. The bullets in the Custom row, on
the contrary, can be swapped at will.
Proceed as follows:
1. In the Custom row, click on the icon that you want to change.
2. Click on the Change button to the right of the row.
3. A character table appears. First, set the Font that you want to use.
Tip for Windows users: The Symbol and Wingdings fonts contain numerous characters that are
suitable for bullets.
4. Double click on the character you want to select.
5. The selected character now appears in the row of available Custom bullets.
Click on OK to apply it.
Note: Although only six user defined bullets are shown in the dialog box, you are
not limited to using only six different bullets. The custom bullets can be redefined
as often as you like – even within the same document.
Drop caps
A “drop cap” refers to a large ornamental letter at the beginning of a paragraph.
TextMaker is capable of creating such an ornamental letter automatically from the
first letter of a paragraph, and of automatically adjusting the following paragraph
text so that it flows smoothly around this first letter.
Manual TextMaker Paragraph formatting 91