Download - SoftMaker

Options available:
3D effect variants
Offers a variety of pre-defined 3D effect settings to choose from.
The entries in the list are merely samples. If required, you can specify the way
the effect appears more precisely with the options listed below.
Options group box
Lets you modify the depth of the 3D object and the angles about which it is
rotated on the horizontal and vertical axes.
3D surface group box
Side faces: By default, the color used for the side faces of the object is determined
automatically. To use a different color, activate the Side faces option and
select the desired color from the list.
Affect front side: If this option is checked, the front side of the object will also
be lightened or darkened according to the lighting of the 3D effect. To change
the lighting, click the More button.
Wire frame: If you check this option, the object is rendered as a wire frame
model.
More button
Click the More button to change the lighting of the 3D effect. An additional
dialog box will appear. To change the position of the light source, click the corresponding
position in the Lighting field. The other two options let you change
the Intensity of the light source and the type of Surface to be simulated.
Object properties, Effects property sheet
FreeOffice: In SoftMaker FreeOffice, the property sheet Effects is not included.
Note: This property sheet is available only for certain types of objects.
On the Effects property sheet, you can add various effects to the object.
The following effects and settings are available:
248 Frames and drawings Manual TextMaker