Download - SoftMaker

Options property sheet to make all hidden objects visible again. Then you can
select the mistakenly hidden object and check its Visible option to make it visible
again.
Changing the order of frames
When two or more frames overlap, you can change the display order of these
objects (which of the objects to display in the foreground, which in the background,
etc.).
This can be accomplished as follows:
1. Select the desired object.
2. Open the Object > Order menu option to choose one of the following commands:
Bring to Front: Brings the object in front of all other objects.
Send to Back: Sends the object behind all other objects.
Bring Forward One Level: Brings the object forward by one level.
Send Backward One Level: Sends the object back by one level.
Grouping frames
When you group several frames/drawings you connect them together to form a unit
that can be selected and manipulated as if it were a single object.
For example, when you select an object that is part of a group of objects, the whole
group will be selected. When you move this object, the whole group will move.
To group objects, you do the following:
1. Select the frames or drawings to be grouped.
To do this, click on each of them in turn while holding down the Shift key
(Shiftª) – or switch to Object mode and draw a rectangle around all the objects
to be grouped.
2. Click the icon in the Object toolbar or invoke the Object > Group command.
252 Frames and drawings Manual TextMaker