Download - SoftMaker

Replacing
Sometimes you want to do more than just find a term in the text. You want an easy
way of exchanging it for another term. The command Edit > Replace (keyboard
shortcut (Ctrl)(H)) is provided to meet this requirement.
Proceed as follows:
1. Invoke the Edit > Replace command.
2. Under Search for, enter the text for which you want to search.
3. Under Replace with, enter the text that is to replace the search text.
4. As necessary, check the options for the search (see section “Expanded search
options” beginning on page 150).
5. Click on the Search button to begin the search.
When TextMaker finds the search text, it scrolls to its position in the document and
selects it.
You can then do any of the following:
A) You can click on Replace to have TextMaker replace the selected occurrence of
the search term with the replacement term and jump to the next occurrence of
the search term.
B) You can click on Search again to have TextMaker jump to the next occurrence
of the search term – without replacing the selected occurrence.
C) You can click on Replace all to have TextMaker replace the selected occurrence
of the search term and all subsequent occurrences it finds in the text.
D) You can click on Close to end the search and close the search dialog.
Repeating a search/replace
To repeat a search or replace operation, or to continue a search or replace operation
that was interrupted, you can use the command Edit > Search again or Edit >
Replace again, or press the (F3) key.
TextMaker continues the last search it was conducting. When it finds another
occurrence of the search term, it displays that occurrence.
Manual TextMaker Searching and replacing 149