Download - SoftMaker

Searching/replacing formatting
The Edit > Search and Edit > Replace allows you to search not only for text, but
also for formatting, and to replace the specified formatting with other formatting as
required.
With this command you can, for example, replace a specific font with another font
at all the points in the text where the former occurs.
To search for formatting, proceed as follows:
1. Invoke Edit > Search.
2. If the Format button is not displayed in the dialog, click on the Enlarge button
to expand the search dialog.
3. Clear any old search term in the Search for field by clicking on the Reset
button.
4. Click on the Format button.
5. Select the kind of formatting for which you want to search: character formatting,
paragraph formatting, character style or paragraph style.
6. In the new dialog box that appears, specify the format(s) for which you want to
search. Then confirm with OK.
7. Now you can start the search with the Search button.
To search for formatting and replace it with other formatting, proceed as
follows:
1. Invoke Edit > Replace.
2. Using the Format button, specify the formatting for which you want to search
(see above) and confirm with OK.
3. Click in the Replace with field.
4. Again use the Format button to specify the formatting that is to replace the
formatting specified above as the search term. Again confirm with OK.
5. Now you can start the search with the Search button.
When TextMaker finds an occurrence of the search term, it displays the occurrence
in the document window.
Manual TextMaker Searching and replacing 153